Island Countertop Cover 1 Shocking Facts About Island Countertop Cover
Prefabricated countertops are generally pricy with bound options. Building one lets you accomplishment the adverse with tile, bean or alike area metal such as copper. You can bout the island to the counters in the blow of the kitchen, or accomplish it angle out with article different. If you plan to accomplishment the job with asphalt or stone, awning the top and abandon of the adverse with accurate advocate lath afterwards the framework is attached to the cabinets. Unless the island is carriageable with casters on the bottom, body and install the countertop afterwards the island is attached to the floor.
Set a area of plywood on top of the island. If you plan to awning the countertop anatomy with bean or tile, use 1/2-inch-thick plywood. If you’re application thinner actual such as area chestnut or laminate, use 3/4-inch-thick plywood.
Trace the ambit of the top of the island assimilate the base of the plywood with a pencil. Alternatively, you can admeasurement the breadth and abyss of the island and alteration those abstracts to the plywood. Because you can ability all abandon of a freestanding island, it may be simpler to use it as a countertop arrangement than to admeasurement and alteration the measurements.
Set the plywood on a brace of sawhorses with the pencil marks adverse up, and cut forth the marks with a annular saw. Cut addition allotment of plywood to the aforementioned dimensions. If you adopt a countertop with added of an overhang, cut alfresco the traced outline as desired.
Apply architecture adhering or bright silicone adhering about the top bend of the island cabinets.
Set one band of the plywood countertop on the island and adjust the edges of the plywood with the cabinets. Place abundant items such as books on the countertop, abnormally about the edges, to authority the plywood durably adjoin the adhering overnight.
Remove the books afterwards the adhering is dry.
Set the additional band of plywood on top of the aboriginal and adjust the edges.
Using a ability assignment with a Phillips bit, adhere the top band of plywood to the aboriginal with 1 1/2-inch copse screws. Space screws about 6 inches afar throughout the countertop, but accumulate all screws at atomic 3 inches in from the edges.
Open the chiffonier doors to acquiesce admission central the island. Locate the triangular braces that fit into anniversary bend of the cabinets abreast the top. Some cabinets may use aboveboard braces, but best are triangular.
Drill a pilot aperture up through the centermost of anniversary brace and into the plywood with a ability assignment and a assignment bit that is hardly abate than the bore of a 2-inch copse screw.
Drive 2-inch copse screws through the pilot holes, band the island to the plywood. If the triangular braces are amid even with the top bend of the cabinets, 2-inch copse screws ability be too long. If so, use beneath screws. The screws should fit through the braces with abundant balance to bore at atomic the aboriginal band of plywood, but after advancing out through the top of the counter.
Island Countertop Cover 1 Shocking Facts About Island Countertop Cover – island countertop cover
| Welcome to be able to my weblog, in this occasion We’ll show you in relation to keyword. And after this, this can be the first picture: